Phillips Lake
Key Takeaway
Phillips Lake is classified as low hazard in Oklahoma. It was completed in 1967 and is 59 years old. Its primary use is other.
Physical Details
| Dam Height | 27 ft (taller than 43% in OK) |
| Dam Length | 310 ft |
| Dam Type | Earth |
| Max Storage | 89 acre-ft |
| Normal Storage | 73 acre-ft |
| Surface Area | 5 acres |
| Max Discharge | 2,426 cfs |
| Year Completed | 1967 (59 years old) |
| NID ID | OK00014 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
MICHAEL A & DEE ANN PHILLIPS
Private
Nearby Dams
Thurman Lake
Beckham, OK
Low Hazard 38 ftMclaury No. 1
Beckham, OK
Low Hazard 34 ftAllison Lake
Beckham, OK
Low Hazard 33 ftRobertson Dam
Beckham, OK
Low Hazard 31 ftShotwell No 2
Beckham, OK
Low Hazard 27 ftShotwell No 1
Beckham, OK
Low Hazard 30 ftShotwell No 7
Beckham, OK
Low Hazard 26 ftThetford D.C.
Beckham, OK
Low Hazard 31 ftFrequently Asked Questions
What is the hazard classification of Phillips Lake?
Phillips Lake is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Phillips Lake?
Phillips Lake is owned by MICHAEL A & DEE ANN PHILLIPS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Phillips Lake built?
Phillips Lake was completed in 1967, making it 59 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Phillips Lake?
Phillips Lake serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Phillips Lake?
Phillips Lake has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Phillips Lake last inspected?
Phillips Lake was last inspected on November 30, 2010. Inspection dates indicate when a formal review occurred, not the results of that inspection.