Phillips Dam
Key Takeaway
Phillips Dam is classified as low hazard in Texas. It was completed in 1932 and is 94 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 15 ft (taller than 15.4% in TX) |
| Dam Length | 310 ft |
| Dam Type | Earth |
| Max Storage | 60 acre-ft |
| Normal Storage | 39 acre-ft |
| Surface Area | 8 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1932 (94 years old) |
| NID ID | TX00600 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
BENJAMIN PHILLIPS
Private
Nearby Dams
Phillips North Lake Dam
Denton, TX
Low Hazard 26 ftLower Lake Dam
Denton, TX
High Hazard 24 ftShiff Lake Dam
Denton, TX
Low Hazard 18 ftVial Lake Dam
Collin, TX
High Hazard 23 ftAnderson Lake Dam
Collin, TX
Low Hazard 22 ftBright Lake Dam
Denton, TX
Low Hazard 26 ftBox Lake Dam
Collin, TX
Low Hazard 18 ftLewisville Dam
Denton, TX
High Hazard 130 ftFrequently Asked Questions
What is the hazard classification of Phillips Dam?
Phillips Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Phillips Dam?
Phillips Dam is owned by BENJAMIN PHILLIPS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Phillips Dam built?
Phillips Dam was completed in 1932, making it 94 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Phillips Dam?
Phillips Dam serves the following purposes: Irrigation, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Phillips Dam?
Phillips Dam has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Phillips Dam last inspected?
Phillips Dam was last inspected on September 10, 1969. Inspection dates indicate when a formal review occurred, not the results of that inspection.