Phillips Dam
Key Takeaway
Phillips Dam is classified as low hazard in South Dakota. It was completed in 2000 and is 26 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 22 ft (taller than 45.6% in SD) |
| Dam Length | 200 ft |
| Dam Type | Earth |
| Max Storage | 54 acre-ft |
| Normal Storage | 25 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 3 sq mi |
| Max Discharge | 1,350 cfs |
| Year Completed | 2000 (26 years old) |
| NID ID | SD02476 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
WILLIAM SCOTT PHILLIPS
Private
Nearby Dams
Ronald Philips Dam No.1
Meade, SD
Low Hazard 29 ftNelson Dam
Meade, SD
Low Hazard 34 ftEarl Mcpherson Dam No.1
Meade, SD
Low Hazard 30 ftHerford Lake
Meade, SD
Low Hazard 28 ftMooney 1
Meade, SD
Low Hazard 15 ftCurlew
Meade, SD
Low Hazard 43 ftE.J. Mooney Dam No.1
Meade, SD
Low Hazard 32 ftD & D Farms
Meade, SD
Low Hazard 29 ftFrequently Asked Questions
What is the hazard classification of Phillips Dam?
Phillips Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Phillips Dam?
Phillips Dam is owned by WILLIAM SCOTT PHILLIPS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Phillips Dam built?
Phillips Dam was completed in 2000, making it 26 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Phillips Dam?
Phillips Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond, Fish And Wildlife Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Phillips Dam?
Phillips Dam has a dam height of 22 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.