Philbrick #3
Key Takeaway
Philbrick #3 is classified as low hazard in Montana. It was completed in 1971 and is 55 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 22 ft (taller than 63.5% in MT) |
| Dam Length | 120 ft |
| Dam Type | Earth |
| Max Storage | 88 acre-ft |
| Normal Storage | 56 acre-ft |
| Drainage Area | 3 sq mi |
| Max Discharge | 350 cfs |
| Year Completed | 1971 (55 years old) |
| NID ID | MT01958 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
PHILBRICK D K RANCH
Private
Nearby Dams
Sand #2
Rosebud, MT
Low Hazard 15 ftSand #1
Rosebud, MT
Low Hazard 15 ftVassaus #11
Rosebud, MT
Low Hazard 20 ftVassaus #5
Rosebud, MT
Low Hazard 16 ftVassaus #4
Rosebud, MT
Low Hazard 20 ftClark #2
Rosebud, MT
Low Hazard 18 ftDunning #2
Rosebud, MT
Low Hazard 20 ftDunning #1
Rosebud, MT
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Philbrick #3?
Philbrick #3 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Philbrick #3?
Philbrick #3 is owned by PHILBRICK D K RANCH (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Philbrick #3 built?
Philbrick #3 was completed in 1971, making it 55 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Philbrick #3?
Philbrick #3 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Philbrick #3?
Philbrick #3 has a dam height of 22 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.