Payne
Key Takeaway
Payne is classified as low hazard in California. It was completed in 1928 and is 98 years old. Its primary use is water supply.
Physical Details
| Dam Height | 12 ft (taller than 4% in CA) |
| Dam Length | 6,250 ft |
| Dam Type | Earth |
| Max Storage | 2.9K acre-ft |
| Surface Area | 526 acres |
| Drainage Area | 5 sq mi |
| Year Completed | 1928 (98 years old) |
| NID ID | CA00475 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Private Entity
Private
Nearby Dams
Danhauser
Modoc, CA
Low Hazard 17 ftUpper Pasture
Modoc, CA
Low Hazard 15 ftLittle Juniper
Modoc, CA
Significant Hazard 22 ftDorris Dam
Modoc, CA
High Hazard 25 ftPlum Canyon
Modoc, CA
Low Hazard 26 ftJames Porter
Modoc, CA
High Hazard 21 ftRye Grass Swale
Modoc, CA
Low Hazard 20 ftBayley Reservoir
Modoc, CA
Low Hazard 20 ftFrequently Asked Questions
What is the hazard classification of Payne?
Payne is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Payne?
Payne is owned by Private Entity (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Payne built?
Payne was completed in 1928, making it 98 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Payne?
Payne serves the following purposes: Water Supply, Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Payne?
Payne has a dam height of 12 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Payne last inspected?
Payne was last inspected on June 21, 2022. Inspection dates indicate when a formal review occurred, not the results of that inspection.