Paul James #2
Key Takeaway
Paul James #2 is classified as low hazard in Alabama. It was completed in 1975 and is 51 years old. Its primary use is fish and wildlife pond.
Physical Details
| Dam Height | 15 ft (taller than 31.9% in AL) |
| Dam Length | 2,000 ft |
| Dam Type | Earth |
| Max Storage | 91 acre-ft |
| Normal Storage | 60 acre-ft |
| Drainage Area | 0 sq mi |
| Max Discharge | 85 cfs |
| Year Completed | 1975 (51 years old) |
| NID ID | AL02160 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
PAUL JAMES
Private
Nearby Dams
Paul James #1
Hale, AL
Low Hazard 15 ftKyser Lakes Dam No.5
Hale, AL
Low Hazard 12 ftKyser Lakes Dam No.6
Hale, AL
Low Hazard 12 ftJoe Kyser #7
Hale, AL
Low Hazard 14 ftOscar Cobb
Perry, AL
Low Hazard 14 ftCottrell Lake Dam
Perry, AL
Low HazardPaul James Pond #1
Hale, AL
Low Hazard 10 ftPaul James Pond #2
Hale, AL
Low Hazard 11 ftFrequently Asked Questions
What is the hazard classification of Paul James #2?
Paul James #2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Paul James #2?
Paul James #2 is owned by PAUL JAMES (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Paul James #2 built?
Paul James #2 was completed in 1975, making it 51 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Paul James #2?
Paul James #2 serves the following purposes: Fish And Wildlife Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Paul James #2?
Paul James #2 has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.