Oknoname 113011
Key Takeaway
Oknoname 113011 is classified as low hazard in Oklahoma. Its primary use is other.
Physical Details
| Dam Height | 30 ft (taller than 54.9% in OK) |
| Dam Length | 400 ft |
| Dam Type | Earth |
| Max Storage | 180 acre-ft |
| Normal Storage | 24 acre-ft |
| Surface Area | 4 acres |
| Max Discharge | 900 cfs |
| NID ID | OK13052 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
E.C. MULLENDORE
Private
Nearby Dams
Oknoname 113009
Osage, OK
Low Hazard 30 ftOknoname 113010
Osage, OK
Low Hazard 40 ftOknoname 30161
Osage, OK
Low Hazard 31 ftOknoname 113008
Osage, OK
Low Hazard 40 ftOknoname 113042
Osage, OK
Low Hazard 35 ftOknoname 113025
Osage, OK
Low Hazard 45 ftSCS-Cotton-Coon-Mission Cr Site-001
Osage, OK
Low Hazard 48 ftSCS-Cotton-Coon-Mission Cr Site-004
Osage, OK
Low Hazard 40 ftFrequently Asked Questions
What is the hazard classification of Oknoname 113011?
Oknoname 113011 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Oknoname 113011?
Oknoname 113011 is owned by E.C. MULLENDORE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Oknoname 113011?
Oknoname 113011 serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Oknoname 113011?
Oknoname 113011 has a dam height of 30 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Oknoname 113011 last inspected?
Oknoname 113011 was last inspected on August 11, 2006. Inspection dates indicate when a formal review occurred, not the results of that inspection.