Morrison Dam
Key Takeaway
Morrison Dam is classified as low hazard in Kansas. It was completed in 1948 and is 78 years old. Its primary use is recreation.
Physical Details
| Dam Height | 14 ft (taller than 3.7% in KS) |
| Dam Length | 680 ft |
| Dam Type | Earth |
| Max Storage | 76 acre-ft |
| Normal Storage | 25 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 1 sq mi |
| Year Completed | 1948 (78 years old) |
| NID ID | KS03776 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
OTTAWAY, DANNY E
Private
Nearby Dams
Haley Dam
Sedgwick, KS
High Hazard 11 ftColumbian Acres Dam No 1
Sedgwick, KS
Low Hazard 12 ftColumbian Acres Dam No 2
Sedgwick, KS
Low Hazard 14 ftDam KS03785
Sedgwick, KS
Significant Hazard 11 ftDd No. 107
Sedgwick, KS
High Hazard 25 ftDam KS03783
Sedgwick, KS
Low Hazard 15 ftFrd No 12a
Sedgwick, KS
Low Hazard 18 ftDam KS03790
Sedgwick, KS
Low Hazard 11 ftFrequently Asked Questions
What is the hazard classification of Morrison Dam?
Morrison Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Morrison Dam?
Morrison Dam is owned by OTTAWAY, DANNY E (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Morrison Dam built?
Morrison Dam was completed in 1948, making it 78 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Morrison Dam?
Morrison Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Morrison Dam?
Morrison Dam has a dam height of 14 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Morrison Dam last inspected?
Morrison Dam was last inspected on June 26, 2012. Inspection dates indicate when a formal review occurred, not the results of that inspection.