Montana #7
Key Takeaway
Montana #7 is classified as low hazard in Montana. It was completed in 1953 and is 73 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 15 ft (taller than 18.8% in MT) |
| Dam Length | 150 ft |
| Dam Type | Earth |
| Max Storage | 62 acre-ft |
| Normal Storage | 32 acre-ft |
| Drainage Area | 1 sq mi |
| Year Completed | 1953 (73 years old) |
| NID ID | MT01883 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
STATE OF MONTANA, D.N.R.C., T.L.M.D.
State Government
Nearby Dams
Borer #2
Rosebud, MT
Low Hazard 14 ftBig Timber #3
Rosebud, MT
Low Hazard 18 ftBig Timber #1
Rosebud, MT
Low Hazard 15 ftGearhart #13
Rosebud, MT
Low Hazard 30 ftErickson #2
Rosebud, MT
Low Hazard 25 ftMontana #6
Rosebud, MT
Low Hazard 20 ftLee #6
Rosebud, MT
Low Hazard 20 ftMogen #1
Rosebud, MT
Low Hazard 15 ftFrequently Asked Questions
What is the hazard classification of Montana #7?
Montana #7 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Montana #7?
Montana #7 is owned by STATE OF MONTANA, D.N.R.C., T.L.M.D. (State Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Montana #7 built?
Montana #7 was completed in 1953, making it 73 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Montana #7?
Montana #7 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Montana #7?
Montana #7 has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.