Milliken Pond Dam
Key Takeaway
Milliken Pond Dam is classified as low hazard in South Carolina. Its primary use is other.
Physical Details
| Dam Height | 25 ft (taller than 62.5% in SC) |
| Max Storage | 34 acre-ft |
| Normal Storage | 28 acre-ft |
| Surface Area | 3 acres |
| NID ID | SC02255 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CANAAN LLC
Private
Nearby Dams
Little River WCD Dam 14
Laurens, SC
Low Hazard 27 ftLittle River WCD Dam 1
Laurens, SC
Low Hazard 27 ftLittle River WCD Dam 13
Laurens, SC
Low Hazard 24 ftLittle River WCD Dam 3
Laurens, SC
High Hazard 32 ftLittle River WCD Dam 24
Laurens, SC
High Hazard 33 ftLittle River WCD Dam 2b
Laurens, SC
High Hazard 33 ftLakeside Country Club Dam
Laurens, SC
Significant Hazard 31 ftLittle River WCD Dam 23
Laurens, SC
High Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Milliken Pond Dam?
Milliken Pond Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Milliken Pond Dam?
Milliken Pond Dam is owned by CANAAN LLC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Milliken Pond Dam?
Milliken Pond Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Milliken Pond Dam?
Milliken Pond Dam has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Milliken Pond Dam last inspected?
Milliken Pond Dam was last inspected on September 27, 2017. Inspection dates indicate when a formal review occurred, not the results of that inspection.