Miller Reservoir (Harney)

GOULD CREEK· Harney, Oregon· Built 1947· Earth· 48 ft tall
Low Hazard Irrigation Private

Key Takeaway

Miller Reservoir (Harney) is classified as low hazard in Oregon. It was completed in 1947 and is 79 years old. Its primary use is irrigation.

Physical Details

Dam Height 48 ft (taller than 83.4% in OR)
Dam Length520 ft
Dam TypeEarth
Max Storage362 acre-ft
Normal Storage362 acre-ft
Surface Area36 acres
Drainage Area3 sq mi
Max Discharge293 cfs
Year Completed1947 (79 years old)
NID IDOR00167

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: April 28, 2015
State Regulated: Yes
Regulatory Agency: OWRD

Ownership

MUDDY CREEK RANCH

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Miller Reservoir (Harney)?

Miller Reservoir (Harney) is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Miller Reservoir (Harney)?

Miller Reservoir (Harney) is owned by MUDDY CREEK RANCH (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Miller Reservoir (Harney) built?

Miller Reservoir (Harney) was completed in 1947, making it 79 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Miller Reservoir (Harney)?

Miller Reservoir (Harney) serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Miller Reservoir (Harney)?

Miller Reservoir (Harney) has a dam height of 48 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Miller Reservoir (Harney) last inspected?

Miller Reservoir (Harney) was last inspected on April 28, 2015. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.