Miller Lake Dam
Key Takeaway
Miller Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 40 ft (taller than 91.5% in GA) |
| Dam Length | 267 ft |
| Dam Type | Earth |
| Max Storage | 56 acre-ft |
| Normal Storage | 46 acre-ft |
| Surface Area | 5 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 56 cfs |
| NID ID | GA02346 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Hedges, James R. Iii
Private
Nearby Dams
Miller Lake Dam
Dade, GA
Low Hazard 30 ftHedges Lake Dam
Dade, GA
Low Hazard 36 ftEllen's Mud Hole Lake Dam
Dade, GA
Low Hazard 23 ftGross Lake Dam
Dade, GA
Low Hazard 29 ftMoore Lake Dam
Dade, GA
Low Hazard 27 ftRaoul Lake Dam
Dade, GA
Low Hazard 27 ftLookout Lake Dam
Dade, GA
Low Hazard 20 ftTucker Branch Lake Dam
Dade, GA
Low Hazard 21 ftFrequently Asked Questions
What is the hazard classification of Miller Lake Dam?
Miller Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Miller Lake Dam?
Miller Lake Dam is owned by Hedges, James R. Iii (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Miller Lake Dam?
Miller Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Miller Lake Dam?
Miller Lake Dam has a dam height of 40 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Miller Lake Dam last inspected?
Miller Lake Dam was last inspected on September 1, 2008. Inspection dates indicate when a formal review occurred, not the results of that inspection.