Miller Bros.
Key Takeaway
Miller Bros. is classified as low hazard in South Dakota. It was completed in 1951 and is 75 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 19 ft (taller than 29.5% in SD) |
| Dam Length | 500 ft |
| Dam Type | Earth |
| Max Storage | 57 acre-ft |
| Normal Storage | 31 acre-ft |
| Max Discharge | 200 cfs |
| Year Completed | 1951 (75 years old) |
| NID ID | SD01815 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
MILLER BROS.
Private
Nearby Dams
Miller Bros.
Perkins, SD
Low Hazard 20 ftFrank Gebracht
Perkins, SD
Low Hazard 19 ftMiller Bros.
Perkins, SD
Low Hazard 21 ftHerman Van Den Berg
Perkins, SD
Low Hazard 18 ftMiller Bros.
Perkins, SD
Low Hazard 21 ftState of Sd
Perkins, SD
Low Hazard 27 ftVern Anders
Perkins, SD
Low Hazard 30 ftHerman Kaubish Dam
Perkins, SD
Low Hazard 21 ftFrequently Asked Questions
What is the hazard classification of Miller Bros.?
Miller Bros. is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Miller Bros.?
Miller Bros. is owned by MILLER BROS. (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Miller Bros. built?
Miller Bros. was completed in 1951, making it 75 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Miller Bros.?
Miller Bros. serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Miller Bros.?
Miller Bros. has a dam height of 19 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.