Mill - Canton Creek W/S Str. #10 Dam
Key Takeaway
Mill - Canton Creek W/S Str. #10 Dam is classified as high hazard in Georgia. It was completed in 1968 and is 58 years old. Its primary use is flood risk reduction. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 24 ft (taller than 54.4% in GA) |
| Dam Length | 435 ft |
| Dam Type | Earth |
| Max Storage | 446 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 1,056 sq mi |
| Max Discharge | 446 cfs |
| Year Completed | 1968 (58 years old) |
| NID ID | GA00039 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Limestone Valley S & Wcd
State Government
Nearby Dams
Interlude Lake Dam
Cherokee, GA
Low Hazard 25 ftHoneysuckle Lake Dam
Cherokee, GA
Low Hazard 28 ftTwin Lakes Dam
Cherokee, GA
Low Hazard 26 ftPickett's Peak Lake Dam
Cherokee, GA
Low Hazard 27 ftMill - Canton Creek W/S Str. #4 Dam
Cherokee, GA
Low Hazard 32 ftLittle River WS Str #15
Cherokee, GA
Low Hazard 23 ftMill - Canton Creek W/S Str. #12 Dam
Cherokee, GA
High Hazard 36 ftLittle River WS Str #17
Cherokee, GA
High Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Mill - Canton Creek W/S Str. #10 Dam?
Mill - Canton Creek W/S Str. #10 Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Mill - Canton Creek W/S Str. #10 Dam?
Mill - Canton Creek W/S Str. #10 Dam is owned by Limestone Valley S & Wcd (State Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Mill - Canton Creek W/S Str. #10 Dam built?
Mill - Canton Creek W/S Str. #10 Dam was completed in 1968, making it 58 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Mill - Canton Creek W/S Str. #10 Dam?
Mill - Canton Creek W/S Str. #10 Dam serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Mill - Canton Creek W/S Str. #10 Dam?
Mill - Canton Creek W/S Str. #10 Dam has a dam height of 24 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Mill - Canton Creek W/S Str. #10 Dam last inspected?
Mill - Canton Creek W/S Str. #10 Dam was last inspected on May 1, 2013. Inspection dates indicate when a formal review occurred, not the results of that inspection.