Mcguire Dam
Key Takeaway
Mcguire Dam is classified as low hazard in Texas. It was completed in 1965 and is 61 years old. Its primary use is water supply.
Physical Details
| Dam Height | 26 ft (taller than 55.2% in TX) |
| Dam Length | 820 ft |
| Dam Type | Earth |
| Max Storage | 140 acre-ft |
| Normal Storage | 85 acre-ft |
| Surface Area | 0 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1965 (61 years old) |
| NID ID | TX03501 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CARLOS MCGUIRE
Private
Nearby Dams
Ej Alderman Dam
Comanche, TX
Low Hazard 28 ftLesley Lake No 2 Dam
Comanche, TX
Low Hazard 20 ftJerry Solomon Dam
Comanche, TX
Low Hazard 15 ftRush Creek WS SCS Site 13 Dam
Comanche, TX
Low Hazard 47 ftThiebaud Dam
Comanche, TX
Low Hazard 25 ftMcginnis Dam
Comanche, TX
Low Hazard 15 ftNichols Dam
Comanche, TX
Low Hazard 16 ftProctor Dam
Comanche, TX
High Hazard 86 ftFrequently Asked Questions
What is the hazard classification of Mcguire Dam?
Mcguire Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Mcguire Dam?
Mcguire Dam is owned by CARLOS MCGUIRE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Mcguire Dam built?
Mcguire Dam was completed in 1965, making it 61 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Mcguire Dam?
Mcguire Dam serves the following purposes: Water Supply. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Mcguire Dam?
Mcguire Dam has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.