Mcgarrahan Dam
Key Takeaway
Mcgarrahan Dam is classified as low hazard in Texas. Its primary use is fire protection.
Physical Details
| Dam Height | 45 ft (taller than 90.1% in TX) |
| Dam Length | 400 ft |
| Dam Type | Earth |
| Max Storage | 150 acre-ft |
| Normal Storage | 0 acre-ft |
| Surface Area | 0 acres |
| Drainage Area | 0 sq mi |
| NID ID | TX06446 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
KEITH MCGARRAHAN
Private
Nearby Dams
Manning Vick Lake No 1 Dam
Young, TX
Low Hazard 16 ftBryson Lake Dam
Jack, TX
Low Hazard 24 ftLake Bryson Dam
Jack, TX
High Hazard 30 ftMccloud Lake Dam
Jack, TX
Significant Hazard 21 ftBarrow Grace Lake Dam
Jack, TX
Low Hazard 17 ftEddleman Dam
Young, TX
High Hazard 57 ftGraham Dam
Young, TX
High Hazard 82 ftUnion Lake Dam
Stephens, TX
Low Hazard 22 ftFrequently Asked Questions
What is the hazard classification of Mcgarrahan Dam?
Mcgarrahan Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Mcgarrahan Dam?
Mcgarrahan Dam is owned by KEITH MCGARRAHAN (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Mcgarrahan Dam?
Mcgarrahan Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Mcgarrahan Dam?
Mcgarrahan Dam has a dam height of 45 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Mcgarrahan Dam last inspected?
Mcgarrahan Dam was last inspected on October 9, 1989. Inspection dates indicate when a formal review occurred, not the results of that inspection.