Mathews Lake Dam
Key Takeaway
Mathews Lake Dam is classified as significant hazard in Texas. It was completed in 1970 and is 56 years old. Its primary use is fire protection. Significant hazard means failure could cause economic or environmental damage. Learn more.
Physical Details
| Dam Height | 20 ft (taller than 33.5% in TX) |
| Dam Length | 1,120 ft |
| Dam Type | Earth |
| Max Storage | 130 acre-ft |
| Normal Storage | 60 acre-ft |
| Surface Area | 10 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1970 (56 years old) |
| NID ID | TX02961 |
Safety Information
No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
BERNICE MATHEWS
Private
Nearby Dams
Gibbs Brothers Lake No 2 Dam
Walker, TX
Low Hazard 18 ftMallery Lake Dam
Walker, TX
Low Hazard 39 ftArmadillo Drive Lake Dam
Walker, TX
Significant Hazard 13 ftBaldwin Dam
Walker, TX
High Hazard 20 ftDawson Lake Dam
Walker, TX
High Hazard 21 ftHatchery Lake Dam
Walker, TX
Low Hazard 24 ftSpring Lake Dam
Walker, TX
High Hazard 24 ftHeath Branch Fishing Club Lake Dam
Walker, TX
High Hazard 21 ftFrequently Asked Questions
What is the hazard classification of Mathews Lake Dam?
Mathews Lake Dam is classified as Significant Hazard. No probable loss of human life, but can cause economic loss, environmental damage, or disruption of lifeline facilities. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Mathews Lake Dam?
Mathews Lake Dam is owned by BERNICE MATHEWS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Mathews Lake Dam built?
Mathews Lake Dam was completed in 1970, making it 56 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Mathews Lake Dam?
Mathews Lake Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Mathews Lake Dam?
Mathews Lake Dam has a dam height of 20 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Mathews Lake Dam last inspected?
Mathews Lake Dam was last inspected on December 10, 2009. Inspection dates indicate when a formal review occurred, not the results of that inspection.