Mathew James #1

GYP CREEK· Powder River, Montana· Built 1949· Earth· 26 ft tall
Low Hazard Irrigation Private

Key Takeaway

Mathew James #1 is classified as low hazard in Montana. It was completed in 1949 and is 77 years old. Its primary use is irrigation.

Physical Details

Dam Height 26 ft (taller than 77.8% in MT)
Dam Length500 ft
Dam TypeEarth
Max Storage263 acre-ft
Normal Storage139 acre-ft
Drainage Area6 sq mi
Max Discharge160 cfs
Year Completed1949 (77 years old)
NID IDMT02479

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
State Regulated: Yes
Regulatory Agency: DNRC

Ownership

Keith/Sharlene Groh

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Mathew James #1?

Mathew James #1 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Mathew James #1?

Mathew James #1 is owned by Keith/Sharlene Groh (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Mathew James #1 built?

Mathew James #1 was completed in 1949, making it 77 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Mathew James #1?

Mathew James #1 serves the following purposes: Irrigation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Mathew James #1?

Mathew James #1 has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.