Lyle Nelson #6
Key Takeaway
Lyle Nelson #6 is classified as low hazard in Montana. It was completed in 1945 and is 81 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 14 ft (taller than 15.6% in MT) |
| Dam Length | 420 ft |
| Dam Type | Earth |
| Max Storage | 105 acre-ft |
| Normal Storage | 51 acre-ft |
| Year Completed | 1945 (81 years old) |
| NID ID | MT00484 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LYLE E NELSON
Private
Nearby Dams
Nelson Reservoir #2
McCone, MT
Low Hazard 15 ftTowe Farms INC #2
McCone, MT
Low Hazard 16 ftTowe Farms INC #1
McCone, MT
Low Hazard 16 ftNomland Dam
McCone, MT
Low Hazard 16 ftJohn Ball Reservoir
McCone, MT
Significant Hazard 16 ftLyle Nelson #5
McCone, MT
Low Hazard 15 ftLyle Nelson #3
McCone, MT
Low Hazard 15 ftLyle Nelson #8
McCone, MT
Low Hazard 20 ftFrequently Asked Questions
What is the hazard classification of Lyle Nelson #6?
Lyle Nelson #6 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Lyle Nelson #6?
Lyle Nelson #6 is owned by LYLE E NELSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Lyle Nelson #6 built?
Lyle Nelson #6 was completed in 1945, making it 81 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Lyle Nelson #6?
Lyle Nelson #6 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Lyle Nelson #6?
Lyle Nelson #6 has a dam height of 14 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.