Leo Williams
Key Takeaway
Leo Williams is classified as low hazard in Alabama. It was completed in 1962 and is 64 years old. Its primary use is fish and wildlife pond.
Physical Details
| Dam Height | 12 ft (taller than 15.1% in AL) |
| Dam Length | 375 ft |
| Dam Type | Earth |
| Max Storage | 101 acre-ft |
| Normal Storage | 75 acre-ft |
| Drainage Area | 0 sq mi |
| Max Discharge | 150 cfs |
| Year Completed | 1962 (64 years old) |
| NID ID | AL00659 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LEO WILLIAMS
Private
Nearby Dams
Mallory Lake Dam
Coffee, AL
Low Hazard 22 ftDanley Estates Lake
Covington, AL
Low HazardJerry Adams
Covington, AL
Low HazardCharles Gibeaut Lake
Covington, AL
Low HazardHarold Wise
Covington, AL
Low Hazard 12 ftHarold Wise Lake
Covington, AL
Low HazardJames Cravey
Covington, AL
Low HazardA K Lord
Covington, AL
Low Hazard 30 ftFrequently Asked Questions
What is the hazard classification of Leo Williams?
Leo Williams is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Leo Williams?
Leo Williams is owned by LEO WILLIAMS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Leo Williams built?
Leo Williams was completed in 1962, making it 64 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Leo Williams?
Leo Williams serves the following purposes: Fish And Wildlife Pond, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Leo Williams?
Leo Williams has a dam height of 12 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.