Kelso Brook Dam
Key Takeaway
Kelso Brook Dam is classified as low hazard in New York. It was completed in 1969 and is 57 years old. Its primary use is recreation.
Physical Details
| Dam Height | 10 ft (taller than 12.4% in NY) |
| Dam Length | 300 ft |
| Dam Type | Earth |
| Max Storage | 80 acre-ft |
| Normal Storage | 56 acre-ft |
| Surface Area | 17 acres |
| Drainage Area | 5 sq mi |
| Max Discharge | 1,000 cfs |
| Year Completed | 1969 (57 years old) |
| NID ID | NY00531 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
HAROLD DICKINSON
Not Listed
Nearby Dams
Minerva Lake Dam
Essex, NY
Low Hazard 20 ftOlmstedville Pond Dam
Essex, NY
Significant Hazard 10 ftSharron Pond Dam
Essex, NY
Significant Hazard 8 ftGore Mt Reservoir Dam
Warren, NY
Significant Hazard 32 ftBalfour Lake Dam
Essex, NY
Low Hazard 7 ftWindover Lake Dam
Warren, NY
Low Hazard 15 ftLoon Lake Dam
Warren, NY
High Hazard 15 ftHorseshoe Pond Dam
Essex, NY
Significant Hazard 16 ftFrequently Asked Questions
What is the hazard classification of Kelso Brook Dam?
Kelso Brook Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Kelso Brook Dam?
Kelso Brook Dam is owned by HAROLD DICKINSON (Not Listed). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Kelso Brook Dam built?
Kelso Brook Dam was completed in 1969, making it 57 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Kelso Brook Dam?
Kelso Brook Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Kelso Brook Dam?
Kelso Brook Dam has a dam height of 10 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Kelso Brook Dam last inspected?
Kelso Brook Dam was last inspected on September 10, 1970. Inspection dates indicate when a formal review occurred, not the results of that inspection.