Kelsey Creek (Pa-600)
Key Takeaway
Kelsey Creek (Pa-600) is classified as high hazard in Pennsylvania. It was completed in 1967 and is 59 years old. Its primary use is flood risk reduction. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 66 ft (taller than 90.5% in PA) |
| Dam Length | 860 ft |
| Dam Type | Earth |
| Max Storage | 795 acre-ft |
| Normal Storage | 40 acre-ft |
| Surface Area | 5 acres |
| Drainage Area | 3 sq mi |
| Year Completed | 1967 (59 years old) |
| NID ID | PA00031 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
TIOGA COUNTY COMMISSIONERS
Local Government
Nearby Dams
Lake Nessmuk (Pa-601)
Tioga, PA
High Hazard 52 ftHamilton Lake (Pa-602)
Tioga, PA
High Hazard 76 ftBrechbill Dam
Tioga, PA
Low Hazard 15 ftLewis Pond
Tioga, PA
Low Hazard 15 ftBrowns Lake
Tioga, PA
Low Hazard 13 ftHills Creek
Tioga, PA
High Hazard 32 ftBorg Dam
Tioga, PA
High Hazard 14 ftTaylor Run
Tioga, PA
Low Hazard 33 ftFrequently Asked Questions
What is the hazard classification of Kelsey Creek (Pa-600)?
Kelsey Creek (Pa-600) is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Kelsey Creek (Pa-600)?
Kelsey Creek (Pa-600) is owned by TIOGA COUNTY COMMISSIONERS (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Kelsey Creek (Pa-600) built?
Kelsey Creek (Pa-600) was completed in 1967, making it 59 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Kelsey Creek (Pa-600)?
Kelsey Creek (Pa-600) serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Kelsey Creek (Pa-600)?
Kelsey Creek (Pa-600) has a dam height of 66 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Kelsey Creek (Pa-600) last inspected?
Kelsey Creek (Pa-600) was last inspected on August 26, 2020. Inspection dates indicate when a formal review occurred, not the results of that inspection.