John Mitchell No.1
Key Takeaway
John Mitchell No.1 is classified as low hazard in Alabama. It was completed in 1986 and is 40 years old. Its primary use is fish and wildlife pond.
Physical Details
| Dam Height | 11 ft (taller than 10.9% in AL) |
| Dam Length | 2,300 ft |
| Dam Type | Earth |
| Max Storage | 94 acre-ft |
| Normal Storage | 51 acre-ft |
| Surface Area | 14 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 115 cfs |
| Year Completed | 1986 (40 years old) |
| NID ID | AL02342 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
JOHN MITCHELL
Private
Nearby Dams
State Cattle Ranch #2
Hale, AL
Low Hazard 17 ftState Cattle Ranch #1
Hale, AL
Low Hazard 18 ftState Cattle Ranch #3
Hale, AL
Low Hazard 17 ftState Cattle Ranch #5
Hale, AL
Low Hazard 18 ftState Cattle Ranch #6
Hale, AL
Low Hazard 18 ftState Cattle Ranch #4
Hale, AL
Low Hazard 17 ftState Cattle Ranch #7
Hale, AL
Low Hazard 18 ftState Cattle Ranch Dam No 1
Hale, AL
Low HazardFrequently Asked Questions
What is the hazard classification of John Mitchell No.1?
John Mitchell No.1 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates John Mitchell No.1?
John Mitchell No.1 is owned by JOHN MITCHELL (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was John Mitchell No.1 built?
John Mitchell No.1 was completed in 1986, making it 40 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of John Mitchell No.1?
John Mitchell No.1 serves the following purposes: Fish And Wildlife Pond, Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is John Mitchell No.1?
John Mitchell No.1 has a dam height of 11 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was John Mitchell No.1 last inspected?
John Mitchell No.1 was last inspected on September 15, 1986. Inspection dates indicate when a formal review occurred, not the results of that inspection.