John Barber Dam

TR-CARTWRIGHT CREEK· Washington, Kentucky· Built 1961· Earth· 26 ft tall
Low Hazard Recreation Private

Key Takeaway

John Barber Dam is classified as low hazard in Kentucky. It was completed in 1961 and is 65 years old. Its primary use is recreation.

Physical Details

Dam Height 26 ft (taller than 33.2% in KY)
Dam Length200 ft
Dam TypeEarth
Max Storage25 acre-ft
Normal Storage18 acre-ft
Surface Area2 acres
Drainage Area0 sq mi
Year Completed1961 (65 years old)
NID IDKY00513

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: August 30, 2007
State Regulated: Yes
Regulatory Agency: KY Division of Water

Ownership

JOHN BARBER

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of John Barber Dam?

John Barber Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates John Barber Dam?

John Barber Dam is owned by JOHN BARBER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was John Barber Dam built?

John Barber Dam was completed in 1961, making it 65 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of John Barber Dam?

John Barber Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is John Barber Dam?

John Barber Dam has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was John Barber Dam last inspected?

John Barber Dam was last inspected on August 30, 2007. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.