Joe Schomer 2
Key Takeaway
Joe Schomer 2 is classified as low hazard in South Dakota. It was completed in 1964 and is 62 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 20 ft (taller than 33.7% in SD) |
| Dam Length | 690 ft |
| Dam Type | Earth |
| Max Storage | 54 acre-ft |
| Normal Storage | 23 acre-ft |
| Max Discharge | 756 cfs |
| Year Completed | 1964 (62 years old) |
| NID ID | SD01563 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
JOE SCHOMER
Private
Nearby Dams
Joe Schomer 1
Stanley, SD
Low Hazard 28 ftStockwater Dam
Stanley, SD
Low Hazard 28 ftGrass Creek 727 (Nid)
Stanley, SD
Low Hazard 24 ftZebroski
Hughes, SD
Low Hazard 34 ftCarl Hansen
Stanley, SD
Low Hazard 24 ftCapitol Lake Dam
Hughes, SD
High Hazard 27 ftJensen Dam
Hughes, SD
Low Hazard 33 ftFourth Street Dam
Hughes, SD
High Hazard 43 ftFrequently Asked Questions
What is the hazard classification of Joe Schomer 2?
Joe Schomer 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Joe Schomer 2?
Joe Schomer 2 is owned by JOE SCHOMER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Joe Schomer 2 built?
Joe Schomer 2 was completed in 1964, making it 62 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Joe Schomer 2?
Joe Schomer 2 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Joe Schomer 2?
Joe Schomer 2 has a dam height of 20 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.