James Terry Dam
Key Takeaway
James Terry Dam is classified as low hazard in Kentucky. It was completed in 1977 and is 49 years old. Its primary use is recreation.
Physical Details
| Dam Height | 26 ft (taller than 33.2% in KY) |
| Dam Length | 310 ft |
| Dam Type | Earth |
| Max Storage | 134 acre-ft |
| Normal Storage | 73 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1977 (49 years old) |
| NID ID | KY00786 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
JAMES TERRY
Private
Nearby Dams
Ben Matthews Lake Dam
Anderson, KY
Low Hazard 28 ftJim Saylor Dam
Shelby, KY
Low Hazard 28 ftHillerich Dam
Shelby, KY
Low Hazard 50 ftJohn Thomas Lake Dam
Anderson, KY
Low Hazard 38 ftBeaver Lake Dam
Anderson, KY
High Hazard 60 ftDonald Deel Lake Dam
Shelby, KY
Low Hazard 54 ftHallenburg & Associates Lake
Shelby, KY
Low Hazard 30 ftRiner Lake
Franklin, KY
Significant Hazard 26 ftFrequently Asked Questions
What is the hazard classification of James Terry Dam?
James Terry Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates James Terry Dam?
James Terry Dam is owned by JAMES TERRY (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was James Terry Dam built?
James Terry Dam was completed in 1977, making it 49 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of James Terry Dam?
James Terry Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is James Terry Dam?
James Terry Dam has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was James Terry Dam last inspected?
James Terry Dam was last inspected on August 16, 2006. Inspection dates indicate when a formal review occurred, not the results of that inspection.