Jack Towne Dam
Key Takeaway
Jack Towne Dam is classified as low hazard in Ohio. It was completed in 1948 and is 78 years old. Its primary use is recreation.
Physical Details
| Dam Height | 16 ft (taller than 15.8% in OH) |
| Dam Length | 350 ft |
| Dam Type | Earth |
| Max Storage | 82 acre-ft |
| Normal Storage | 39 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 731 cfs |
| Year Completed | 1948 (78 years old) |
| NID ID | OH01669 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
James Cowin
Private
Nearby Dams
Salt Fork Lake Dam
Guernsey, OH
High Hazard 61 ftRitz Lake Dam
Guernsey, OH
Low Hazard 30 ftDarrow Lake Dam
Guernsey, OH
Low Hazard 26 ftDarrow Lake No. 1 Dam (Upper)
Guernsey, OH
Significant Hazard 26 ftCity of Cambridge Park Dam
Guernsey, OH
Significant Hazard 16 ftMemory Lake Dam
Tuscarawas, OH
Significant Hazard 27 ftLarrick Lake Dam
Guernsey, OH
Low Hazard 35 ftArnold Lake Dam
Tuscarawas, OH
Low Hazard 35 ftFrequently Asked Questions
What is the hazard classification of Jack Towne Dam?
Jack Towne Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Jack Towne Dam?
Jack Towne Dam is owned by James Cowin (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Jack Towne Dam built?
Jack Towne Dam was completed in 1948, making it 78 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Jack Towne Dam?
Jack Towne Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Jack Towne Dam?
Jack Towne Dam has a dam height of 16 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Jack Towne Dam last inspected?
Jack Towne Dam was last inspected on October 21, 2022. Inspection dates indicate when a formal review occurred, not the results of that inspection.