J & N Ranch Dam
Key Takeaway
J & N Ranch Dam is classified as low hazard in Kansas. Its primary use is fire protection.
Physical Details
| Dam Height | 33 ft (taller than 81.7% in KS) |
| Dam Length | 350 ft |
| Dam Type | Earth |
| Max Storage | 71 acre-ft |
| Normal Storage | 34 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 0 sq mi |
| NID ID | KS04075 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
HOAGLAND, JOE
Private
Nearby Dams
Dam KS04074
Leavenworth, KS
Low Hazard 35 ftDam KS02808
Leavenworth, KS
Low Hazard 36 ftDam KS04481
Leavenworth, KS
Low Hazard 28 ftDam KS07360
Leavenworth, KS
Low Hazard 25 ftDam KS02685
Wyandotte, KS
Low Hazard 27 ftDam KS02986
Wyandotte, KS
Low Hazard 26 ftDam KS02687
Wyandotte, KS
Low Hazard 30 ftPiper Lake A.K.A. Canaan Lake
Wyandotte, KS
High Hazard 33 ftFrequently Asked Questions
What is the hazard classification of J & N Ranch Dam?
J & N Ranch Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates J & N Ranch Dam?
J & N Ranch Dam is owned by HOAGLAND, JOE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of J & N Ranch Dam?
J & N Ranch Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is J & N Ranch Dam?
J & N Ranch Dam has a dam height of 33 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was J & N Ranch Dam last inspected?
J & N Ranch Dam was last inspected on March 18, 2004. Inspection dates indicate when a formal review occurred, not the results of that inspection.