Hunts Lake Dam
Key Takeaway
Hunts Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 7 ft (taller than 0.2% in GA) |
| Dam Length | 978 ft |
| Dam Type | Earth |
| Max Storage | 102 acre-ft |
| Normal Storage | 37 acre-ft |
| Surface Area | 18 acres |
| Drainage Area | 0 sq mi |
| NID ID | GA02399 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Prather, Daniel Owens, Mr. & Mrs.
Private
Nearby Dams
Kirkpatrick Lake Dam
Polk, GA
Low Hazard 10 ftYork Lake Dam
Polk, GA
High Hazard 27 ftSpringdale Lake Dam
Polk, GA
Low Hazard 8 ftKimoto Lake Dam
Polk, GA
Low Hazard 26 ftElder Lake North Dam
Polk, GA
Low Hazard 26 ftBig Cedar Creek WS Str # 13
Polk, GA
Low Hazard 28 ftWilliams Lake Dam
Polk, GA
Low Hazard 20 ftCulp Lake Dam
Polk, GA
Low Hazard 34 ftFrequently Asked Questions
What is the hazard classification of Hunts Lake Dam?
Hunts Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Hunts Lake Dam?
Hunts Lake Dam is owned by Prather, Daniel Owens, Mr. & Mrs. (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Hunts Lake Dam?
Hunts Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Hunts Lake Dam?
Hunts Lake Dam has a dam height of 7 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Hunts Lake Dam last inspected?
Hunts Lake Dam was last inspected on February 1, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.