Howard
Key Takeaway
Howard is classified as low hazard in Montana. It was completed in 1960 and is 66 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 20 ft (taller than 44.5% in MT) |
| Dam Length | 700 ft |
| Dam Type | Earth |
| Max Storage | 124 acre-ft |
| Normal Storage | 63 acre-ft |
| Year Completed | 1960 (66 years old) |
| NID ID | MT00122 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DUCO FARMS
Private
Nearby Dams
Fiske
McCone, MT
Low Hazard 30 ftVine Reservoir
McCone, MT
Low Hazard 15 ftF Whitmus #2
McCone, MT
Low Hazard 21 ftKwasney
McCone, MT
Low Hazard 31 ftSlimy Stock
McCone, MT
Low Hazard 26 ftHainie Reservoir
McCone, MT
Low Hazard 19 ftGibbs #1
McCone, MT
Low Hazard 12 ftHudiburgh
McCone, MT
Significant Hazard 20 ftFrequently Asked Questions
What is the hazard classification of Howard?
Howard is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Howard?
Howard is owned by DUCO FARMS (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Howard built?
Howard was completed in 1960, making it 66 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Howard?
Howard serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Howard?
Howard has a dam height of 20 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.