Hodges Pond Dam
Key Takeaway
Hodges Pond Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 12 ft (taller than 9.4% in GA) |
| Dam Length | 430 ft |
| Dam Type | Earth |
| Max Storage | 206 acre-ft |
| Normal Storage | 72 acre-ft |
| Surface Area | 24 acres |
| Drainage Area | 220 sq mi |
| NID ID | GA03295 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Hodges, Raymond G.
Private
Nearby Dams
Delmus Rushing Lake Dam
Bulloch, GA
Low Hazard 11 ftBowen Mill Pond Dam
Bulloch, GA
Low Hazard 10 ftT.K. Rushing Pond Dam
Bulloch, GA
Low Hazard 9 ftD H Smith Pond Dam
Bulloch, GA
Low Hazard 8 ftAnderson Pond Dam
Bulloch, GA
Low Hazard 15 ftWilliams Pond Dam
Bulloch, GA
Low Hazard 9 ftJames Tillman Pond Dam
Bulloch, GA
Low Hazard 7 ftNevils Pond Dam
Bulloch, GA
Low Hazard 11 ftFrequently Asked Questions
What is the hazard classification of Hodges Pond Dam?
Hodges Pond Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Hodges Pond Dam?
Hodges Pond Dam is owned by Hodges, Raymond G. (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Hodges Pond Dam?
Hodges Pond Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Hodges Pond Dam?
Hodges Pond Dam has a dam height of 12 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Hodges Pond Dam last inspected?
Hodges Pond Dam was last inspected on November 1, 2004. Inspection dates indicate when a formal review occurred, not the results of that inspection.