Hill's Millpond Dam

COON CREEK· Schley, Georgia· Built 1850· Earth· 13 ft tall
Low Hazard Other Private

Key Takeaway

Hill's Millpond Dam is classified as low hazard in Georgia. It was completed in 1850 and is 176 years old. Its primary use is other.

Physical Details

Dam Height 13 ft (taller than 12.9% in GA)
Dam Length300 ft
Dam TypeEarth
Max Storage180 acre-ft
Normal Storage97 acre-ft
Surface Area32 acres
Drainage Area2,682 sq mi
Year Completed1850 (176 years old)
NID IDGA03051

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 3, 2016
State Regulated: No

Ownership

Taylor,Mr. and Mrs. Matthew

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Hill's Millpond Dam?

Hill's Millpond Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Hill's Millpond Dam?

Hill's Millpond Dam is owned by Taylor,Mr. and Mrs. Matthew (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Hill's Millpond Dam built?

Hill's Millpond Dam was completed in 1850, making it 176 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Hill's Millpond Dam?

Hill's Millpond Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Hill's Millpond Dam?

Hill's Millpond Dam has a dam height of 13 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Hill's Millpond Dam last inspected?

Hill's Millpond Dam was last inspected on May 3, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.