Heards Lake Dam
Key Takeaway
Heards Lake Dam is classified as low hazard in Georgia. Its primary use is recreation.
Physical Details
| Dam Height | 19 ft (taller than 36.5% in GA) |
| Dam Length | 675 ft |
| Dam Type | Earth |
| Max Storage | 269 acre-ft |
| Normal Storage | 151 acre-ft |
| Surface Area | 21 acres |
| Drainage Area | 0 sq mi |
| NID ID | GA03269 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Hilliard Land & Timber Trust
Private
Nearby Dams
Candler Lake Dam
Marion, GA
Low Hazard 16 ftCloats Pond Dam
Marion, GA
Low Hazard 12 ftLambert Lake Dam
Marion, GA
Low Hazard 21 ftWilletts Lake Dam
Marion, GA
Low Hazard 23 ftMelton Lake Dam
Marion, GA
Unknown 21 ftBrown Lake Dam
Marion, GA
Low Hazard 14 ftFort Perry Plantation Lake Dam
Marion, GA
Low Hazard 28 ftAnderson Pond Dam
Chattahoochee, GA
Low Hazard 21 ftFrequently Asked Questions
What is the hazard classification of Heards Lake Dam?
Heards Lake Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Heards Lake Dam?
Heards Lake Dam is owned by Hilliard Land & Timber Trust (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Heards Lake Dam?
Heards Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Heards Lake Dam?
Heards Lake Dam has a dam height of 19 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Heards Lake Dam last inspected?
Heards Lake Dam was last inspected on October 19, 2017. Inspection dates indicate when a formal review occurred, not the results of that inspection.