Harold Meyer
Key Takeaway
Harold Meyer is classified as low hazard in South Dakota. It was completed in 1950 and is 76 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 16 ft (taller than 15.7% in SD) |
| Dam Length | 400 ft |
| Dam Type | Earth |
| Max Storage | 104 acre-ft |
| Normal Storage | 84 acre-ft |
| Max Discharge | 1,488 cfs |
| Year Completed | 1950 (76 years old) |
| NID ID | SD00341 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
HAROLD MEYER
Private
Nearby Dams
Bohle Dam
Corson, SD
Low Hazard 35 ftHarry Bickel
Corson, SD
Low Hazard 27 ftPhillip Jung No.1
Corson, SD
Low Hazard 17 ftPhillip Jung No.2
Corson, SD
Low Hazard 18 ftHarold Meyer
Corson, SD
Low Hazard 23 ftAmerican Luthern Church
Corson, SD
Low Hazard 30 ftBill Lindskou
Corson, SD
Low Hazard 19 ftHarold Arnold
Corson, SD
Low Hazard 21 ftFrequently Asked Questions
What is the hazard classification of Harold Meyer?
Harold Meyer is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Harold Meyer?
Harold Meyer is owned by HAROLD MEYER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Harold Meyer built?
Harold Meyer was completed in 1950, making it 76 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Harold Meyer?
Harold Meyer serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Harold Meyer?
Harold Meyer has a dam height of 16 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.