Hamlick Reservoir
Key Takeaway
Hamlick Reservoir is classified as low hazard in Montana. It was completed in 1959 and is 67 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 24 ft (taller than 67.5% in MT) |
| Dam Length | 660 ft |
| Dam Type | Earth |
| Max Storage | 114 acre-ft |
| Normal Storage | 66 acre-ft |
| Year Completed | 1959 (67 years old) |
| NID ID | MT01196 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CAP ROCK RANCH INC
Private
Nearby Dams
Cap Rock #1
Custer, MT
Low Hazard 20 ftT-Diamond #1
Custer, MT
Low Hazard 22 ftKountz
Custer, MT
Low Hazard 25 ftCap Rock #4
Custer, MT
Low Hazard 17 ftReed #4
Custer, MT
Low Hazard 16 ftPfaft #1
Prairie, MT
Low Hazard 14 ftGrimes Dam
Custer, MT
Low Hazard 16 ftPfaff Irrigation
Prairie, MT
Significant Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Hamlick Reservoir?
Hamlick Reservoir is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Hamlick Reservoir?
Hamlick Reservoir is owned by CAP ROCK RANCH INC (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Hamlick Reservoir built?
Hamlick Reservoir was completed in 1959, making it 67 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Hamlick Reservoir?
Hamlick Reservoir serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Hamlick Reservoir?
Hamlick Reservoir has a dam height of 24 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.