Haggard Dam
Key Takeaway
Haggard Dam is classified as low hazard in Oklahoma. Its primary use is other.
Physical Details
| Dam Height | 21 ft (taller than 17.7% in OK) |
| Dam Length | 435 ft |
| Dam Type | Earth |
| Max Storage | 78 acre-ft |
| Normal Storage | 40 acre-ft |
| Surface Area | 10 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 90 cfs |
| NID ID | OK30290 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
BRYAN HUNTER
Private
Nearby Dams
Oknoname 30132
Custer, OK
Low Hazard 27 ftSCS-Barnitz Creek Site-032
Custer, OK
Low Hazard 39 ftSCS-Barnitz Creek Site-033
Custer, OK
Low Hazard 40 ftSCS-Barnitz Creek Site-068
Custer, OK
Low Hazard 38 ftSCS-Barnitz Creek Site-030
Custer, OK
Low Hazard 38 ftSCS-Barnitz Creek Site-034
Custer, OK
Low Hazard 37 ftSCS-Barnitz Creek Site-105
Custer, OK
Low Hazard 34 ftSCS-Barnitz Creek Site-031
Custer, OK
Low Hazard 39 ftFrequently Asked Questions
What is the hazard classification of Haggard Dam?
Haggard Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Haggard Dam?
Haggard Dam is owned by BRYAN HUNTER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Haggard Dam?
Haggard Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Haggard Dam?
Haggard Dam has a dam height of 21 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Haggard Dam last inspected?
Haggard Dam was last inspected on July 26, 2011. Inspection dates indicate when a formal review occurred, not the results of that inspection.