Grapevine Dam

DENTON CREEK· Tarrant, Texas· Built 1952· Earth· 137 ft tall

Key Takeaway

Grapevine Dam is classified as high hazard in Texas. It was completed in 1952 and is 74 years old. Its primary use is flood risk reduction. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.

Physical Details

Dam Height 137 ft (taller than 99.7% in TX)
Dam Length12,350 ft
Dam TypeEarth
Max Storage788.0K acre-ft
Normal Storage181.0K acre-ft
Surface Area7,380 acres
Drainage Area688 sq mi
Max Discharge191,310 cfs
Year Completed1952 (74 years old)
NID IDTX00005

Safety Information

High Hazard

Loss of human life is likely if the dam fails.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: Yes
Last Inspection: April 20, 2019
State Regulated: No

Ownership

USACE - Fort Worth District

Federal Government

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Grapevine Dam?

Grapevine Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Grapevine Dam?

Grapevine Dam is owned by USACE - Fort Worth District (Federal Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Grapevine Dam built?

Grapevine Dam was completed in 1952, making it 74 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Grapevine Dam?

Grapevine Dam serves the following purposes: Flood Risk Reduction, Fish And Wildlife Pond, Recreation, Water Supply. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Grapevine Dam?

Grapevine Dam has a dam height of 137 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Grapevine Dam last inspected?

Grapevine Dam was last inspected on April 20, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.