George Dam
Key Takeaway
George Dam is classified as low hazard in Kentucky. It was completed in 1965 and is 61 years old. Its primary use is recreation.
Physical Details
| Dam Height | 28 ft (taller than 41.6% in KY) |
| Dam Length | 175 ft |
| Dam Type | Earth |
| Max Storage | 10 acre-ft |
| Normal Storage | 19 acre-ft |
| Surface Area | 2 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1965 (61 years old) |
| NID ID | KY00611 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ELMER J. GEORGE
Private
Nearby Dams
Fagan Branch Dam
Marion, KY
High Hazard 78 ftMarion County Sportsmans Dam
Marion, KY
High Hazard 40 ftLankford Dam
Marion, KY
High Hazard 33 ftMontgomery Dam
Marion, KY
Significant Hazard 30 ftGlenn Hawkins Lake (Upper)
Taylor, KY
Low Hazard 38 ftCaulk Lake Dam
Taylor, KY
Low Hazard 66 ftGlenn Hawkins Lake (Lower)
Taylor, KY
Low Hazard 25 ftAw Tate Dam
Washington, KY
Low Hazard 18 ftFrequently Asked Questions
What is the hazard classification of George Dam?
George Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates George Dam?
George Dam is owned by ELMER J. GEORGE (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was George Dam built?
George Dam was completed in 1965, making it 61 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of George Dam?
George Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is George Dam?
George Dam has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was George Dam last inspected?
George Dam was last inspected on December 28, 2004. Inspection dates indicate when a formal review occurred, not the results of that inspection.