George Clark
Key Takeaway
George Clark is classified as low hazard in South Dakota. It was completed in 1951 and is 75 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 18 ft (taller than 24.1% in SD) |
| Dam Length | 350 ft |
| Dam Type | Earth |
| Max Storage | 86 acre-ft |
| Normal Storage | 60 acre-ft |
| Max Discharge | 100 cfs |
| Year Completed | 1951 (75 years old) |
| NID ID | SD02045 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ALINE SCHROEDER
Private
Nearby Dams
Odou Patterson
Perkins, SD
Low Hazard 39 ftNolan Sexton
Perkins, SD
Low Hazard 23 ftBen Clark
Perkins, SD
Low Hazard 19 ftTwo Buttes Dam
Perkins, SD
Low Hazard 19 ftBeryl Veal
Perkins, SD
Low Hazard 18 ftBeryl Veal
Perkins, SD
Low Hazard 14 ftLouie Englehardt
Perkins, SD
Low Hazard 16 ftLewellan Engelhardt
Perkins, SD
Low Hazard 21 ftFrequently Asked Questions
What is the hazard classification of George Clark?
George Clark is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates George Clark?
George Clark is owned by ALINE SCHROEDER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was George Clark built?
George Clark was completed in 1951, making it 75 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of George Clark?
George Clark serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is George Clark?
George Clark has a dam height of 18 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.