Garner Dam
Key Takeaway
Garner Dam is classified as low hazard in Iowa. It was completed in 2000 and is 26 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 26 ft (taller than 24.7% in IA) |
| Dam Length | 281 ft |
| Dam Type | Earth |
| Max Storage | 43 acre-ft |
| Normal Storage | 28 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 2000 (26 years old) |
| NID ID | IA03318 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Paul Garner
Private
Nearby Dams
Goldin Dam
Linn, IA
Low Hazard 29 ftSouth Lake Dam
Linn, IA
Low Hazard 28 ftParsons Dam
Linn, IA
Low Hazard 29 ftPalisades-Kepler Dam
Linn, IA
Low Hazard 8 ftMorf Dam
Linn, IA
Low Hazard 33 ftCarson Dam
Johnson, IA
Low Hazard 27 ftZenishek Dam
Johnson, IA
Low Hazard 25 ftLakeside Development Dam
Linn, IA
Significant Hazard 45 ftFrequently Asked Questions
What is the hazard classification of Garner Dam?
Garner Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Garner Dam?
Garner Dam is owned by Paul Garner (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Garner Dam built?
Garner Dam was completed in 2000, making it 26 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Garner Dam?
Garner Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Garner Dam?
Garner Dam has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.