Frd No 39
Key Takeaway
Frd No 39 is classified as high hazard in Kansas. Its primary use is flood risk reduction. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 43 ft (taller than 94.8% in KS) |
| Dam Length | 1,214 ft |
| Dam Type | Earth |
| Max Storage | 1.6K acre-ft |
| Normal Storage | 116 acre-ft |
| Surface Area | 19 acres |
| Drainage Area | 4 sq mi |
| NID ID | KS05472 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
SALT CREEK WJD NO 46
Local Government
Nearby Dams
Frd No 38
Lincoln, KS
Low Hazard 26 ftDam KS03654
Lincoln, KS
Low Hazard 17 ftDam KS01280
Lincoln, KS
Low Hazard 24 ftFrd No 40
Lincoln, KS
Low Hazard 31 ftFrd No 37
Lincoln, KS
Significant Hazard 37 ftFrd No 41
Lincoln, KS
Low Hazard 33 ftFrd No 34
Lincoln, KS
Low Hazard 31 ftCrawford; Tracewell; Dd No E-1
Lincoln, KS
Low Hazard 31 ftFrequently Asked Questions
What is the hazard classification of Frd No 39?
Frd No 39 is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Frd No 39?
Frd No 39 is owned by SALT CREEK WJD NO 46 (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Frd No 39?
Frd No 39 serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Frd No 39?
Frd No 39 has a dam height of 43 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Frd No 39 last inspected?
Frd No 39 was last inspected on September 21, 2021. Inspection dates indicate when a formal review occurred, not the results of that inspection.