Frd No 24
Key Takeaway
Frd No 24 is classified as low hazard in Kansas. It was completed in 1986 and is 40 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 31 ft (taller than 76.4% in KS) |
| Dam Length | 2,800 ft |
| Max Storage | 2.1K acre-ft |
| Normal Storage | 51 acre-ft |
| Surface Area | 20 acres |
| Drainage Area | 5 sq mi |
| Max Discharge | 1,859 cfs |
| Year Completed | 1986 (40 years old) |
| NID ID | KS05459 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
UPPER WALNUT WJD NO 33
Local Government
Nearby Dams
Dam KS00302
Butler, KS
Low Hazard 18 ftDam KS00301
Butler, KS
Low Hazard 16 ftDam KS00307
Butler, KS
Low Hazard 14 ftDam KS00295
Butler, KS
Low Hazard 18 ftDam KS00300
Butler, KS
Low Hazard 18 ftDam KS03863
Butler, KS
Low Hazard 16 ftDam KS00297
Butler, KS
Low Hazard 15 ftDetention Dam No Sp-6
Butler, KS
Low Hazard 18 ftFrequently Asked Questions
What is the hazard classification of Frd No 24?
Frd No 24 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Frd No 24?
Frd No 24 is owned by UPPER WALNUT WJD NO 33 (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Frd No 24 built?
Frd No 24 was completed in 1986, making it 40 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Frd No 24?
Frd No 24 serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Frd No 24?
Frd No 24 has a dam height of 31 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.