Frd No 23a
Key Takeaway
Frd No 23a is classified as low hazard in Kansas. It was completed in 1993 and is 33 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 50 ft (taller than 97.5% in KS) |
| Dam Length | 1,700 ft |
| Dam Type | Earth |
| Max Storage | 5.3K acre-ft |
| Normal Storage | 43 acre-ft |
| Surface Area | 12 acres |
| Drainage Area | 13 sq mi |
| Max Discharge | 6,200 cfs |
| Year Completed | 1993 (33 years old) |
| NID ID | KS07150 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
SOUTH FORK WJD NO 76
Local Government
Nearby Dams
Frd No 22
Chase, KS
Low Hazard 45 ftDam KS05370
Butler, KS
Low Hazard 25 ftDam KS04779
Butler, KS
Low Hazard 16 ftDam KS04816
Chase, KS
Low Hazard 26 ftDam KS03867
Butler, KS
Low Hazard 26 ftDd No 118
Chase, KS
Low Hazard 28 ftFrd No 20
Chase, KS
Low Hazard 47 ftDam KS03866
Butler, KS
Low Hazard 13 ftFrequently Asked Questions
What is the hazard classification of Frd No 23a?
Frd No 23a is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Frd No 23a?
Frd No 23a is owned by SOUTH FORK WJD NO 76 (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Frd No 23a built?
Frd No 23a was completed in 1993, making it 33 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Frd No 23a?
Frd No 23a serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Frd No 23a?
Frd No 23a has a dam height of 50 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.