Frd No 12
Key Takeaway
Frd No 12 is classified as low hazard in Kansas. It was completed in 1986 and is 40 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 28 ft (taller than 62.6% in KS) |
| Dam Length | 1,260 ft |
| Dam Type | Earth |
| Max Storage | 973 acre-ft |
| Normal Storage | 87 acre-ft |
| Surface Area | 21 acres |
| Drainage Area | 2 sq mi |
| Max Discharge | 1,624 cfs |
| Year Completed | 1986 (40 years old) |
| NID ID | KS05461 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DIAMOND CREEK WJD NO 61
Local Government
Nearby Dams
Frd No 13
Morris, KS
Low Hazard 35 ftFrd No 1
Morris, KS
High Hazard 32 ftDd No 112 (Gutsch)
Morris, KS
Low Hazard 26 ftDam KS03577
Morris, KS
Low Hazard 20 ftFrd No 2
Morris, KS
High Hazard 40 ftFrd No 14
Morris, KS
Low Hazard 21 ftFrd No. 3
Dickinson, KS
Low Hazard 33 ftFrd No 13
Marion, KS
Low Hazard 25 ftFrequently Asked Questions
What is the hazard classification of Frd No 12?
Frd No 12 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Frd No 12?
Frd No 12 is owned by DIAMOND CREEK WJD NO 61 (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Frd No 12 built?
Frd No 12 was completed in 1986, making it 40 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Frd No 12?
Frd No 12 serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Frd No 12?
Frd No 12 has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.