Fink #2
Key Takeaway
Fink #2 is classified as low hazard in Montana. It was completed in 1957 and is 69 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 10 ft (taller than 3.7% in MT) |
| Dam Length | 150 ft |
| Dam Type | Earth |
| Max Storage | 83 acre-ft |
| Normal Storage | 5 acre-ft |
| Year Completed | 1957 (69 years old) |
| NID ID | MT02600 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
JACK STYLER
Private
Nearby Dams
Havre Reservoir
Fergus, MT
Low Hazard 16 ftStyer #2
Fergus, MT
Low Hazard 24 ftIndian #4
Fergus, MT
Low Hazard 28 ftEd Styer #2
Fergus, MT
Low Hazard 20 ftPeters #2
Fergus, MT
Low Hazard 24 ftEd Styer #3
Fergus, MT
Low Hazard 30 ftCooper Adams #1
Fergus, MT
Low Hazard 18 ftAdams #2
Fergus, MT
Low Hazard 16 ftFrequently Asked Questions
What is the hazard classification of Fink #2?
Fink #2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Fink #2?
Fink #2 is owned by JACK STYLER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Fink #2 built?
Fink #2 was completed in 1957, making it 69 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Fink #2?
Fink #2 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Fink #2?
Fink #2 has a dam height of 10 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.