Estes Dam No 2
Key Takeaway
Estes Dam No 2 is classified as low hazard in Kansas. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 30 ft (taller than 71.7% in KS) |
| Dam Length | 340 ft |
| Dam Type | Earth |
| Max Storage | 45 acre-ft |
| Normal Storage | 15 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 1,432 cfs |
| NID ID | KS04015 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
ESTES, DEE J
Private
Nearby Dams
Estes Dam No 1
Jefferson, KS
Significant Hazard 23 ftGlasgow Dam
Jefferson, KS
Low Hazard 30 ftFlanders Dam
Jefferson, KS
Low Hazard 28 ftDam KS02749
Jefferson, KS
Low Hazard 32 ftDam KS01121
Jefferson, KS
Low Hazard 24 ftDam KS01070
Jefferson, KS
Low Hazard 27 ftDam KS02781
Jefferson, KS
Low Hazard 27 ftDam KS01093
Jefferson, KS
Low Hazard 27 ftFrequently Asked Questions
What is the hazard classification of Estes Dam No 2?
Estes Dam No 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Estes Dam No 2?
Estes Dam No 2 is owned by ESTES, DEE J (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Estes Dam No 2?
Estes Dam No 2 serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Estes Dam No 2?
Estes Dam No 2 has a dam height of 30 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Estes Dam No 2 last inspected?
Estes Dam No 2 was last inspected on October 18, 1990. Inspection dates indicate when a formal review occurred, not the results of that inspection.