Erickson #4
Key Takeaway
Erickson #4 is classified as low hazard in Montana. It was completed in 1931 and is 95 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 18 ft (taller than 36.9% in MT) |
| Dam Length | 225 ft |
| Dam Type | Earth |
| Max Storage | 108 acre-ft |
| Normal Storage | 51 acre-ft |
| Drainage Area | 2 sq mi |
| Max Discharge | 600 cfs |
| Year Completed | 1931 (95 years old) |
| NID ID | MT01920 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
GRANT ERICKSON
Private
Nearby Dams
Erickson #3
Rosebud, MT
Low Hazard 14 ftT L Johnson #1
Rosebud, MT
Low Hazard 22 ftHarstad #1
Rosebud, MT
Low Hazard 26 ftDonley Reservoir (Rosebud)
Rosebud, MT
Low Hazard 38 ftT L Johnson #5
Rosebud, MT
Low Hazard 15 ftErickson #2
Rosebud, MT
Low Hazard 25 ftJohnson #1
Rosebud, MT
Low Hazard 20 ftBorer #2
Rosebud, MT
Low Hazard 14 ftFrequently Asked Questions
What is the hazard classification of Erickson #4?
Erickson #4 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Erickson #4?
Erickson #4 is owned by GRANT ERICKSON (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Erickson #4 built?
Erickson #4 was completed in 1931, making it 95 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Erickson #4?
Erickson #4 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Erickson #4?
Erickson #4 has a dam height of 18 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.