Empire Mills Dam

SALMON CREEK· Wayne, New York· Built 1916· Concrete· 13 ft tall
Low Hazard Recreation Not Listed

Key Takeaway

Empire Mills Dam is classified as low hazard in New York. It was completed in 1916 and is 110 years old. Its primary use is recreation.

Physical Details

Dam Height 13 ft (taller than 29.9% in NY)
Dam Length102 ft
Dam TypeConcrete
Max Storage126 acre-ft
Normal Storage62 acre-ft
Surface Area19 acres
Max Discharge3,300 cfs
Year Completed1916 (110 years old)
NID IDNY00813

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 19, 1977
State Regulated: Yes
Regulatory Agency: NYS DEC

Ownership

INDIAN SUMMER INC

Not Listed

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Empire Mills Dam?

Empire Mills Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Empire Mills Dam?

Empire Mills Dam is owned by INDIAN SUMMER INC (Not Listed). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Empire Mills Dam built?

Empire Mills Dam was completed in 1916, making it 110 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Empire Mills Dam?

Empire Mills Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Empire Mills Dam?

Empire Mills Dam has a dam height of 13 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Empire Mills Dam last inspected?

Empire Mills Dam was last inspected on May 19, 1977. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.