Dunning Sese S 32 #2

FRISBIE DRAW· Sheridan, Wyoming· Built 2013· Earth· 27 ft tall

Key Takeaway

Dunning Sese S 32 #2 is classified as low hazard in Wyoming. It was completed in 2013 and is 13 years old. Its primary use is irrigation.

Physical Details

Dam Height 27 ft (taller than 50.7% in WY)
Dam Length3,400 ft
Dam TypeEarth
Max Storage20 acre-ft
Normal Storage16 acre-ft
Surface Area3 acres
Drainage Area0 sq mi
Max Discharge0 cfs
Year Completed2013 (13 years old)
Year Modified2014
NID IDWY02548

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 14, 2019
State Regulated: Yes
Regulatory Agency: SEO

Ownership

SCOTT T. & CANDICE B. JOHNSON REV. TRUST

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Dunning Sese S 32 #2?

Dunning Sese S 32 #2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Dunning Sese S 32 #2?

Dunning Sese S 32 #2 is owned by SCOTT T. & CANDICE B. JOHNSON REV. TRUST (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Dunning Sese S 32 #2 built?

Dunning Sese S 32 #2 was completed in 2013, making it 13 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Dunning Sese S 32 #2?

Dunning Sese S 32 #2 serves the following purposes: Irrigation, Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Dunning Sese S 32 #2?

Dunning Sese S 32 #2 has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Dunning Sese S 32 #2 last inspected?

Dunning Sese S 32 #2 was last inspected on May 14, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.