Delaney Creek Dam No. 10
Key Takeaway
Delaney Creek Dam No. 10 is classified as low hazard in Indiana. It was completed in 1982 and is 44 years old. Its primary use is flood risk reduction.
Physical Details
| Dam Height | 24 ft (taller than 38.5% in IN) |
| Dam Length | 870 ft |
| Dam Type | Earth |
| Max Storage | 571 acre-ft |
| Normal Storage | 51 acre-ft |
| Surface Area | 11 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 1,030 cfs |
| Year Completed | 1982 (44 years old) |
| NID ID | IN03251 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
DELANEY CREEK C.D.
Local Government
Nearby Dams
Delaney Creek Dam No. 11
Washington, IN
High Hazard 39 ftDelaney Creek Dam No. 12
Washington, IN
High Hazard 38 ftDelaney Creek Dam No. 13
Washington, IN
Low Hazard 39 ftDelaney Creek Dam No. 14
Washington, IN
High Hazard 31 ftDelaney Creek Dam No. 2
Washington, IN
High Hazard 41 ftElk Creek Dam No. 1
Washington, IN
Significant Hazard 31 ftDelaney Creek Dam No. 4
Washington, IN
Low Hazard 29 ftElk Creek Dam No. 2
Washington, IN
Significant Hazard 34 ftFrequently Asked Questions
What is the hazard classification of Delaney Creek Dam No. 10?
Delaney Creek Dam No. 10 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Delaney Creek Dam No. 10?
Delaney Creek Dam No. 10 is owned by DELANEY CREEK C.D. (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Delaney Creek Dam No. 10 built?
Delaney Creek Dam No. 10 was completed in 1982, making it 44 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Delaney Creek Dam No. 10?
Delaney Creek Dam No. 10 serves the following purposes: Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Delaney Creek Dam No. 10?
Delaney Creek Dam No. 10 has a dam height of 24 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Delaney Creek Dam No. 10 last inspected?
Delaney Creek Dam No. 10 was last inspected on February 4, 2016. Inspection dates indicate when a formal review occurred, not the results of that inspection.